911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
/f6-3.6l_turbo/Page-460008.png)
7. Install the holder for water hoses. It is essential that the centering pin engages in the holder bore. Tighten the fastening screw.
Tightening torque: 10 Nm (7.5 ft. lbs.).
8. Install the coolant hoses with hose holders in the correct position.
9. Push vacuum pipe onto switch-over valve.
10. Fill in ATF. => Page 201 'Checking and topping up the ATF'
