911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Antenna Amplifier: Service and Repair
Removing And Installing Antenna Amplifier
Removing antenna amplifier
INFORMATION:
-
The antenna amplifier is installed together with the PCM.
-
The antenna amplifier is located on the A-pillars.
-
Remove the ignition key and switch off the audio system.
1. Unplug the antenna plug for the windscreen -1, 2-.
2. Unplug the plug connections for the antenna control unit -3, 4- on the left-hand side and -3, 4, 5- on the right-hand side.
3. Unscrew both fastening screws -6-.
Installing antenna amplifier
1. Position the antenna amplifier on the A-pillar and screw down the fastening screws -6-.
2. Plug in the connectors for the antenna control unit -3, 4- on the left-hand side and -3, 4, 5- on the right-hand side.
3. Plug in the antenna connectors for the windscreen -1- and -2-.