911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Move the five retaining clips -2- as far as possible to one side -Arrow A- and open them up with a screwdriver -Arrow B-. Remove retaining clips
-2-.
2. Insert a screwdriver between the air outlet grille -1- and rear apron -3- and release the three locking lugs.
3. Remove the air outlet grille -1- from the rear apron -3- (-Arrow C-).
Removing ornamental exhaust pipe
1. Insert a screwdriver between the rear apron -2- and ornamental exhaust pipe -1- while at the same time releasing the five locking lugs, and remove
the ornamental exhaust pipe -1- and rear apron -2-.
Removing lower part of rear apron