911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Installing door handle
INFORMATION: To fit the door handle correctly, the return spring must be hooked into place prior to installation.
1. Position door handle -2- on door trim panel and secure with fastening screws -1-. Tightening torque: Final tightening: 2 Nm (ftlb.) (1.5)+0.2 Nm
(ftlb.) (+0.1)
INFORMATION: Pull the door handle carefully to check that the return spring is fixed correctly.
Subsequent work
1. Install door trim panel. Refer to Removing and installing door trim panel.