911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Preparing connection areas of the body for installing the door hinge (on body side)
Safety instructions for dealing with flying sparks during grinding and welding work
WARNING: Grinding and welding work
-
Danger of fire or explosion
-
Avoid working in an area with highly inflammable or explosive materials.
-
Cover highly inflammable or explosive areas.
-
Remove highly inflammable or explosive parts.
Preparing connection areas of the body for installing the door hinge (on body side)
1. Clean undersealing, adhesive residue and paint off the body connecting flanges from inside in the marked areas -A- and -B- using a hot-air gun or
rotary brush. Grind the connecting flanges until bare.
2. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A- and -B- using a hot-air gun or rotary brush.
Grind the connecting flanges until bare.
Preparing door hinge (on body side) for installation
Safety instructions for sharp-edged body and unit parts
CAUTION: Pointed or sharp objects
-
Risk of cracks, pricks or cuts
-
Wear personal protective gear.