911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
5. Use a plastic welder -1- TRIAC S plastic welder WE WE1120 to heat up the fastening pins -2- for the cover until visco-elasticity is achieved.
6. Use an 8-mm round stock -1- to press the fastening pins -2- in evenly on the door trim panel.
Subsequent work
1. Fit door handle. Refer to Removing and installing door handle.
2. Install door trim panel. Refer to Removing and installing door trim panel.
3. Install trim panel for mirror triangle. Refer to Trim panel for mirror triangle.