911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-762001.png)
Hood Latch Release: Service and Repair
Removing and Installing Servo Motor For Emergency Release
Removing And Installing Servo Motor For Emergency Release
Technical values
Preliminary work
Preliminary work on servo motor for emergency release
Refer to Removing and installing front apron.
Removing servo motor for emergency release
1. Switch off ignition and remove ignition key.
2. Release electric connector -A- and unplug it at the servo motor.
3. Unscrew both fastening screws -1-.
