911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Position upper part of rear lid lock -2- and tighten the fastening screws -1- slightly.
2. Adjust upper part of lid lock -2- in relation to the lid according to the noted position, if necessary, determine left and right gap.
3. Tighten fastening screws -1-. : 9.7 Nm (7.0 ftlb.)
4. Check lid function.
Checking lid functions
1. Close the rear lid and lock it.
2. Check that the rear lid is held down by the safety hook (locking hook) after the lid lock has been opened.
3. Check return spring on lower part of lock pulls back the safety hook as far as the stop when lid is open.