911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-774004.png)
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for side underbody -1-.
2. Tightening fastening screw -2-. Tightening torque: 1.5 ftlb.
3. Tightening fastening nuts -3-. Tightening torque: 1.5 ftlb.
Subsequent work
Reworking
Lower the vehicle. Refer to Lifting the vehicle.
