911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-775002.png)
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for front underbody -1-.
2. Tighten fastening screws -2-. Tightening torque: 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque: 0.5 ftlb.
Subsequent work
Lower the vehicle. Refer to Lifting the vehicle
