911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Press fastening nuts -4- into the wheel housing liner -3-.
2. Insert wheel housing liner -3-.
3. Screw in fastening screws -1- and tighten to the specified Tightening torque: Final tightening: 2 Nm (1.5 ftlb.).
4. Screw on fastening nuts -2- and tighten to the specified Tightening torque: Final tightening: 1.5 Nm (1.0 ftlb.).
Installing rear wheel housing liner - front section