911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Preparing connection areas of the body for installation of the front panel
Safety instructions for dealing with flying sparks during grinding and welding work
WARNING: Grinding and welding work
-
Danger of fire or explosion
-
Avoid working in an area with highly inflammable or explosive materials.
-
Cover highly inflammable or explosive areas.
-
Remove highly inflammable or explosive parts.
Preparing connection areas of the body for installation of the front panel
1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C, D, E, F- using a hot-air gun or rotary
brush. Grind the connecting flanges until bare.
2. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C, D- using a hot-air gun or rotary
brush. Grind the connecting flanges until bare.
3. Coat spot-weld flange areas with zinc powder paint
3.1. Coat spot-weld flange areas with zinc powder paint.
Fitting front panel and preparing for installation
Safety instructions for sharp-edged body and unit parts