911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
11.3.
Loosen spring struts at the spring-strut dome by loosening and unscrewing the nuts -2-.
12. Remove front axle.
Cross member support
12.1.
Support the front axle and fuel tank.
Stud on transmission support (all- wheel drive)
12.2.
For all-wheel drive: Loosen and unscrew the nuts -2- on the transmission support -1-.
Loosen and unscrew studs -3- on transmission support -1- and remove transmission support -1-.
Front-axle threaded joint
12.3.
Loosen and remove screws -1- securing front axle to body.
Lower front axle -2- using the spring struts and remove in a downward direction.
Installing front axle