911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Install lid for outer tray.
3.1. Open lid for inner tray.
3.2. Position lid for outer tray -2- and secure with the fastening screws -1-.
Subsequent work
INFORMATION: Only when removing lid for inner tray.
Install centre console. Refer to Removing and installing centre console.
Removing and Installing Tunnel Support
Removing And Installing Tunnel Support
Technical values
Preliminary work
1. Remove triggering unit for airbag. Refer to Removing and installing triggering unit for airbag
2. Remove glove box. Refer to Removing and installing glove box.
3. Remove PCM display and operator control unit. Refer to Removing and installing PCM display and operator control unit.
4. Remove air-conditioning system regulator. Refer to Removing and installing air-conditioning system regulator.
5. Remove switch console. Refer to Removing and installing switch console.
6. Remove trim panel under dashboard on the driver's side. Refer to Removing and installing trim panel under dashboard.