porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Cover (Cold Air Bulkhead)|Page 4348 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4346
Page 32
background image

Installing trim under dashboard on the driver's side

1. Insert cover under the instrument panel -2- on the guides.

2. Swivel cover under the instrument panel -2- upwards -arrow A-.
3. Screw in -1- fastening screws. Tightening torque: 1.5 ftlb.

Removing and installing the cover under the instrument panel on the passenger's side

Removing the cover under the instrument panel on the passenger's side

Removing and Installing Cover (Cold Air Bulkhead)|Page 4348 > < Removing and Installing Cover (Cold Air Bulkhead)|Page 4346