911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Drink Holders: Removal and Replacement
Removing And Installing Cup Holder
Technical values
Removing cup holder
1. Open the glove compartment.
2. Unscrew fastening screws -2- from cupholder -1-.
3. Take off the cup holder -1-.
Installing cup holder
1. Push cup holder -1- into the shaft of the glove compartment.
2. Tighten fastening screws M5 x 30 -2-. Tightening torque: final tightening: 7.0 ftlb.