911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Installing bushing for rear backrest
1. Screw in bushing for rear backrest -1- in -direction of arrow-.
Securing seat belt and fitting
INFORMATION: Ensure that belt strap can run properly.
1. Secure fastening screw -2-, washer -3-, seat belt with fitting -4- and spacer sleeve -5- on the body. Tightening torque: 50 Nm (37 ftlb.) ± 10 %
2. Press cap -1- onto the fastening screw -2- (-arrow-).
Subsequent work
1. Install rear belt locks at the right and left. Refer to Removing and installing rear belt lock.
2. Install trim panel for rear wall Refer to Removing and installing trim panel for rear wall.
3. Install rear side trim panel at left and right. Refer to Removing and installing rear side trim panel.
4. Install rear backrest. Refer to Removing and installing rear backrest.