911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
INFORMATION: The height adjusting nut is set to its basic setting at the factory. This setting should not be changed.
1. Insert Allen key into the emergency operation mechanism and turn it counterclockwise (in direction of arrow) until the flap lid starts to move
vertically.
2. Introduce rear side panel flap -1- into top of frame for roll-over protection system -3- -Arrow A-, then swing it inwards -Arrow B- and insert it into
the pins -2- -Arrow C-.
3. Push in electric plug connection -1- until it engages audibly.