911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Guide water drip pan -1- into position from above -arrow A- and insert into water drain tube at the bottom -2- (-arrow B-).
2. Press in plug -3-.
3. Position support -4- on water drip pan -1- and screw fastening screw -5- in but do not tighten.
4. Adjust support -4-. Refer to Adjusting convertible top
5. Tighten fastening screw -5-. Tightening torque: 23 Nm (17 ftlb.)
6. Press in seal for convertible-top compartment lid close to the water drip pan.
Subsequent work
Install convertible top. Refer to Removing and installing convertible top.