911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing convertible top lock
1. Unscrew the four fastening screws -3-. Remove convertible-top lock -A- and disconnect electric plug connections -6-.
Installing convertible top lock
1. Plug in electric plug connections -6- and position convertible top lock -A- on roof frame. Coat the four fastening screws -3- with screw locking
lacquer and tighten. Tightening torque: 8 Nm (6 ftlb.)
Installing cover for convertible top lock
1. Slide cover -B- over the convertible top lock from the rear -A-. Ensure the cover -B- is centred and engages in the guide, then push it forward until
it clicks into position. Press the front edge of the cover -B- up and bend it forward slightly with your fingers. The cover -B- clicks into place.