911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Pull seal for cowl panel frame -1- off the sheetmetal flange on the cowl panel frame.
Installing seal for cowl panel frame
1. Place seal for cowl panel frame -1- on the sheetmetal flange on the cowl panel frame.
2. Position seal for cowl panel frame -2- at the left and right and secure with new rivets -1-.
INFORMATION: Make sure that the water drain is not trapped.
3. Press rubber seal for door -2- at the left and right onto the sheetmetal flange and slide in sheetmetal insert -Inset-.