911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-854005.png)
1. Unscrew the two fastening screws -1- on the support -2-.
2. Set support -2- with connected motor and air cushion control valve aside.
3. Remove the two tie-wraps -1- on the air cushion motor -2-.
4. Release plug connection -3- -arrow a- and disconnect -arrows B-.
5. Pull off the white hose -4- from the air cushion control valve -arrow C- and remove the air cushion motor -2-.
Installing air cushion motor
1. Position air cushion motor -2- and push on the white hose -4- onto the air cushion control valve -arrow A-.