911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-855001.png)
Power Seat Switch: Service and Repair
Removing and Installing Air Cushion Switch
Removing And Installing Air Cushion Switch
Preliminary work
Remove control module trim panel (electric). Refer to Removing and installing control module trim panel.
Removing air cushion switch
Removing control unit for memory seat adjustment with support
1. Unscrew the two fastening screws -1- and remove control unit for memory seat adjustment together with the support -2- from the seat frame.
2. Unlock and pull off the three connectors on the control unit for memory seat adjustment -arrows a-.
