911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Pull cover -1- out of the fastening clamps -2- close to the belt strap guide -arrow A-.
If the fastening clamps -2- are also pulled off, remove them from the cover immediately -arrow B-.
3. Fit the removed fastening clamps -2- on the backrest frame.
4. Pull off the cover -1- at the Velcro fasteners -2- and -3- ( -arrows- ).
5. Fold over the cover -1-, starting at the bottom -arrow A- and carefully pull it out of the backrest shell -2- ( -arrows B- ).
If the fastening clamps -3- are also pulled off, remove them from the cover immediately -arrow C-.
6. Fit the removed fastening clamps -3- on the backrest frame.
7. Remove cover -1- and padding -2- from the backrest shell -3- ( -arrows- ).