911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-865026.png)
9. Align cover -1- with the side bolsters.
INFORMATION: Make sure the Velcro fasteners join cleanly.
10. Press on Velcro fasteners -2- and -3- ( -arrows- ).
11. Press joint on cover -1- into the backrest shell -2- at the sides using a plastic wedge and secure by tapping gently (with a plastic hammer).
12. Remove adhesive tape -2- from the backrest shell -1-.
Subsequent work
