911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-874001.png)
Power Door Lock Switch: Service and Repair
Removing And Installing Central Locking Switch
Removing central locking switch
INFORMATION: The central locking switch is located in the centre air vent.
1. With a screwdriver through the top air slot, release the left and right retaining clip -A- and pull the air vent out of the dashboard.
2. Pull apart the electrical plug connections and remove the air vent.
3. Unclip and take off central locking switch from the air vent.
Installing central locking switch
