911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Power Seat Switch: Service and Repair
Removing and Installing Switch For Memory Seat Adjustment
Removing And Installing Switch For Memory Seat Adjustment
Removing switch for memory seat adjustment
1. Switch off ignition and remove ignition key.
2. Release switch for memory seat adjustment -1- at the four locking tabs -arrows a-. Swivel switch for memory seat adjustment -1- out of the door
trim panel at the clip -2- in -direction of arrow-.
3. Release connector -2- and remove it -arrow a-. Remove switch for memory seat adjustment -1-.
Installing switch for memory seat adjustment