911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-881003.png)
2.3. Unscrew mount -2- at both hydraulic cylinders completely out of the rear spoiler -1- by hand and lift up the rear spoiler -1-.
Removing rear spoiler (with defective spoiler drive)
WARNING: Risk of injury if the emergency release mechanism of the spoiler drive on the rear spoiler is not used correctly.
-
The rear spoiler is pretensioned when the assembly aid is pumped up.
-
When the emergency release is actuated, the mounts move in suddenly and the rear spoiler moves up.
-
Always make sure to observe the exact sequence when using the emergency release of the spoiler drive.
-
When using the emergency release mechanism of the spoiler drive, the rear spoiler must be held tightly by a second person.
-
Wear gloves.
INFORMATION:
-
To remove the rear spoiler in the event of damage to the spoiler drive, a second person must lift the rear spoiler by hand in order to insert the
assembly aid P 9751.
-
The rear spoiler may only be lifted by hand if it cannot be extended manually. The rear spoiler can also be extended on one side and only the
