911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Insert the two hydraulic cylinders together with the pump unit. Place hydraulic cylinders in installation position and secure with fastening screws
-1-. Tightening torque: 10 Nm (7.5 ftlb.)
2. Clip in wire harness.
3. Connect connector on auxiliary brake light. Refer to Removing and installing auxiliary brake light.
4. Fit pump unit -2- and screw in fastening screws -1-. Tightening torque: 10 Nm (7.5 ftlb.)