911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Convertible Top Weatherstrip: Service and Repair
Removing and Installing Seal For Hood Tip
Removing And Installing Seal For Hood Tip
Technical values
Preliminary work
Move hood to service position. Refer to Hood service position
Removing seal for hood tip
Removing cover strip
1. Unscrew fastening screws -1- and remove cover strip -2- and buffer -3- from the roof frame -4- (-arrow-).
Removing seal for hood tip
INFORMATION: The seal on the roof frame is in two parts.
1. Pull the lower seal -1- at the sides out of the profile of the retaining strip -2- (-arrow-).
2. Unscrew fastening screws -3- at the front on the roof frame.
3. Remove fastening screws -1- from the retaining strip -2-. Detach seal for hood tip -3-.