911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Steering-column switch, bottom
Remove screw -1-, unclip cable guide -2-, pull off electric plug connections and pull out steering-column switch.
3. Remove airbag contact unit (spring) from steering-column switch
Information
Airbag contact unit marking
Ensure that arrow -A- on the rotor is positioned between the markings -B- of the arrows -C- on the airbag contact unit and that the locking element -D-
is engaged.
Unclip airbag contact unit (spring) -Arrows- and remove it carefully.
Airbag contact unit
Replacing
The steering-angle sensor can only be replaced together with the airbag contact unit -E- and electronic unit -F-.