911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Coolant: Service and Repair
Draining and filling in coolant (includes bleeding)
Draining coolant
Information
To facilitate assembly of coolant pipes and hoses, smear with Kluber Syntheso Glep or alternatively Kluberplus S06-100 assembly gel.
Information
Check Henn coupling O-rings and replace them if necessary.
Clean plug connection and coolant hoses before assembly.
Coat O-rings and coolant hoses with Kluberplus Gel (Part No. 000.043.205.93).
Remove stoppers before fitting the coolant lines and hoses.
Warning
Hot pressurized coolant.
Danger of scalding and burning.
-
Only work on the coolant system when the engine is "cool".
-
Wear protective clothes, gloves and goggles.
1. Open cap on the reservoir -1- and remove it.
Cap for coolant reservoir
2. Remove rear underbody panel.