911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Preliminary Work
Caution
Risk of damage due to particles of dirt.
Danger of material damage due to blocked oil bores/oil ducts.
-
Absolute cleanliness is essential when working on the engine.
-
Lay removed engine parts on a clean base and make sure to cover them.
-
Use the cover for dust protection when fitting the engine NR.165 on the engine assembly support.
1. Remove engine.
2. Remove transmission.
3. Secure engine support to the engine/transmission flange with screw sleeves.
4. Secure engine to the assembly support with an engine lift. Get another person to help you do this.
5. Remove rear silencers.
6. Remove cover for camshaft housing.
7. Remove spark plugs. This makes it easier to turn the engine.
Component overview
Component overview for camshafts