911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Loosening/tightening camshaft actuator
Information
Only remove oil guide housing from the camshaft if the camshaft has to be replaced.
Use a magnetic socket-wrench insert when unscrewing the cylinder screws.
The oil guide housing of cylinder 1-3 and 4-6 differ in height.
Oil guide housing
6. Loosen oil guide housing (do not remove it).
6.1.
Heat the three hexagon socket head bolts (M5 x 10, micro-self-locking) with a hot-air gun and screw out bolts.
Threaded joints for oil guide housing
7. Remove camshaft housing.
7.1.
Loosen the Torx screws (M6 x 30) on the housings evenly from the inside out. Remove the housings in the specified order.