porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Crankshaft Main Bearing > < Removing and Installing Camshaft Housing|Page 943

911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)

Page 1
background image

Connecting Rod: Specifications

Connecting rod bolts M9 x 1.25

M97/70 and M97/70S

Initial tightening ........................................................................................................................................................  30 Nm (22 ftlb.) Replace screws
Torque angle ..........................................................................................................................................................................................................   90°

Connecting rod bolts M10 x 1.25

M97/76

Initial tightening .................................................................................................................................................................................  30 Nm (22 ftlb.)
Torque angle ..........................................................................................................................................................................................................   60°

Crankshaft Main Bearing > < Removing and Installing Camshaft Housing|Page 943