911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Danger
Risk of engine falling down.
Danger of fatal injury, material damage.
-
Support the engine with the prescribed tool.
1. Lower engine.
Lower the engine by max. 40 mm.
Support the engine with a jack and retainer plate P 9592.
Loosen and screw off M12 collar nuts on the engine mounting. Carefully lower the engine using the jack.
Removing oil filler neck
1. Remove oil-level sender.
1.1.
Pull off cable plug.
1.2.
Unscrew screw -2- and pull out oil-level sender -1-.
1.3.
Remove oil filler neck -5-.
Unscrew screws -6- and pull oil filler neck off the flange.
Removing and installing oil filler neck
Installing oil filler neck
1. Install oil-level sender.
1.1.
Install oil filler neck.
Replace sealing ring. Insert oil filler neck -5- into the oil tank flange.
1.2.
Insert oil-level sender -1-, fit and tighten screws -2 and 6-.
-
Tightening torque: 10 Nm (7.5 ftlb.)
1.3.
Connect cable plug to oil-level sender -1-.