911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing and installing cycle valve
1.4.
Remove hose from clip and lay to one side.
2. Remove oil/water heat exchanger.
Information
Oil and coolant will flow out when the oil/water heat exchanger is removed.
Place a cloth underneath the heat exchanger and cover the generator to prevent contamination and subsequent damage to engine components.
2.1.
Remove screws -1-. Lift large oil/water heat exchanger and remove it.
Large oil/water heat exchanger
Removing small oil/water heat exchanger
Information
Oil and coolant will flow out when the oil/water heat exchanger is removed.
Place a cloth underneath the heat exchanger and cover the generator to prevent contamination and subsequent damage to engine components.
1. Remove cycle valve for active carbon filter.
1.1.
Pull off cable plug -3- and vacuum line -2-. Pull cycle valve for active carbon filter -1- out of the bracket and remove it.