911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Vent lines on oil/water heat exchanger
4. Install cycle valve for active carbon filter.
4.1.
Push on cable plug -3- and vacuum line -2-. Insert cycle valve for active carbon filter -1- into the bracket.
Removing and installing cycle valve
Subsequent Work
1. Install left intake-air distributor.
2. Raise the engine.
Lift the engine using a jack and retainer plate P 9592 in the assembly position.
Screw in and tighten M12 collar nuts.
-
Tightening torque: 85 Nm (63 ftlb.)
3. Install fuel filter.
4. Install air cleaner housing.
5. Install pressure pipe.
6. Fill in coolant and bleed the system.