911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
5. Open the screw-type clamp -1- and take out the fuel filter. Mark the position of the plastic holder -2- with respect to the filter.
Installing fuel filter
DANGER:
Risk of fire from escaping fuel.
-
Danger of fatal injury and damage to property.
-
Observe basic safety instructions when working on the fuel system.
-
Secure working area.
1. Position the fuel filter and holder in the screw-type clamp -1- and tighten the clamp. The screw head on the clamp must be facing straight up in
installation position.
2. Pre-position the filter module on the coolant reservoir. Slide the retaining lug into the groove on the coolant reservoir -Arrow- and clip in locking
clip -1-.