911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-239002.png)
Preliminary work
1. Remove air cleaner housing.
2. Remove rear wheels using special tool socket-wrench insert P300 so as not to damage the rims.
3. Remove rear apron.
4. Remove bumper.
5. Remove the two charge air coolers.
Removing spark plugs
1. Screw off M6 nut -1- on protective plate.
2. Unscrew two Torx screws (M6 x 20) -Arrows- on the turbocharger.
3. Pull intake air lines out of the flange on the turbocharger.
4. Press intake air lines out of the brackets -Arrow- in the engine compartment.
