porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Servo Motor For Temperature Mixing Flap (Pink)|Page 3344 > < Removing and Installing Servo Motor For Temperature Mixing Flap (Pink)|Page 3342

911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)

Page 3
background image

3. Lay electric line to the servo motor -A- and connect the electric connector to servo motor until it is felt to engage.

4. Secure servo motor with the fastening screw -1-. - Tightening torque: 1.2 Nm (1.0 ftlb.) ±0.5 Nm (±0.5 ftlb.)
5. Switch on ignition and check function of servo motor by adjusting the air conditioning control.

Subsequent work

Subsequent work for fresh/recirc. air servo motor

1. Install heating/air-conditioning unit.

Removing and Installing Servo Motor For Temperature Mixing Flap (Pink)|Page 3344 > < Removing and Installing Servo Motor For Temperature Mixing Flap (Pink)|Page 3342