911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
4. Unscrew the fastening nut -2- and fastening screw -3- and remove the crash support -5-.
5. Disengage the engine coolant line from the three holders -4-.
6. Unscrew fastening screw -6- for the compressor/evaporator line at the connection point.
7. Screw on the three cable compartment holders -7-, fold them up and pull the lines out of the rubber mountings.
8. Close off the two air-conditioning line connections for the compressor/evaporator with plugs.
9. Pull air-conditioning line for the compressor/evaporator up out of the engine compartment area.
Installing compressor/evaporator line
1. Guide air-conditioning line for the compressor/evaporator in through the engine compartment area from above.