911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-658008.png)
12. Screw down dashboard bracket with the two fastening screws -5-. - Tightening torque: 23 Nm (17 ftlb.)
13. Clip in the plastic holders for the electric main wire harness to the dashboard bracket.
14. Secure dashboard bracket with the fastening screw -4-. - Tightening torque: 9.7 Nm (7.0 ftlb.)
15. Screw down holder of heater/air-conditioning unit with the fastening screw -3-. - Tightening torque: 3.5 Nm (2.5 ftlb.)
16. Slide the fastening bolts of the heater/air-conditioning unit through the firewall lid and tighten with the three fastening nuts -6-. - Tightening
torque: 9.7 Nm (7.0 ftlb.)
INFORMATION:
-
Do not remove the plugs until just before installing the expansion valve.
-
Check the condition of foam parts for damage; if in doubt replace.
