911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-663001.png)
Cabin Temperature Sensor / Switch: Service and Repair
Removing And Installing Temperature Sensor
Removing temperature sensor
1. Switch off ignition and remove ignition key.
2. From the driver's side, reach around to the "driver's footwell" air vent to release and disconnect the electrical connector -a-.
3. Turn temperature sensor through 90° and pull it out of the heating/air conditioner unit.
Installing temperature sensor
1. Switch off ignition and remove ignition key.
