911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Glove Box Lamp: Service and Repair
Removing And Installing Glove Compartment Light
Removing glove compartment light
CAUTION:
Danger of damage to property if bulbs are used or handled incorrectly.
-
Risk of damage to bulbs and bulb housing.
-
Risk of damage to bulbs and bulb housing.
-
To prevent short circuits, the load in question must be switched off while changing bulbs.
-
Only bulbs specified in the bulb table may be used.
-
Bulbs with a higher wattage may damage the bulb housing.
-
New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when
changing bulbs.
-
In certain states, it is compulsory to carry spare light bulbs.
1. Press glove compartment light carefully out of the glove compartment at the cutout -arrow- using a screwdriver.
2. Release plug on glove compartment light -arrows a- and pull it off.
3. Remove glove compartment light.
Installing glove compartment light