911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
4. Unscrew the fastening nuts -2-, lift up the control unit and detach it.
Installing front control unit
WARNING:
Risk of damage to electronic control modules.
-
If care is not taken, electrical and electronic components may be destroyed.
-
Before removing the control module, switch off the ignition and remove the ignition key.
1. Insert the front control unit into the body and secure with the fastening nut -2-. - Tightening torque: 7.0 ftlb.
2. Push in the electrical connector and lock it so that it is felt to engage.
3. Clip in left and right electric lines on the control unit.