911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Unscrew fastening screw -1-.
2. Release electric connector -a- and pull it off the control unit.
3. Disengage control unit for direction indicator light on the body.
Installing control unit for direction indicator light
1. Engage control unit for direction indicator light on the body.
2. Push electric connector onto the control unit -a- until it is felt to engage.
3. Screw in fastening screw -1-. - Tightening torque: 10 Nm (7.5 ftlb.)
Subsequent work
Subsequent work for control unit for direction indicator light
Install main headlight.
Switch on ignition, turn on the indicator and check that the direction indicator light is working.