911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-951002.png)
2. Press engine compartment light carefully out of the blower motor housing at the cutout -arrow- using a screwdriver.
3. Pull off plug on engine compartment light and remove engine compartment light.
Removing bulb for light
1. Remove defective bulb from between the contact springs.
Installing bulb for engine compartment light
Installing bulb for light
INFORMATION: Only use the relevant bulb specified in the bulb table
1. Insert new bulb into the contact springs.
Installing engine compartment light