911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-115001.png)
Drive Belt: Service and Repair
Removing and Installing Drive Belt
Removing and installing drive belt
Preliminary Work
1. Remove air cleaner housing.
Removing drive belt
1. Mark the running direction of the drive belt (with a paint marker, for example) if you intend to reuse it.
Drive belt routing
2. Unscrew three outer Torx screws (M8 x 12) -Arrows- on the hydraulic pump pulley by approx. half a turn.
Screws on power-steering pump pulley
3. Relieve the drive belt at the tensioning roller.
