911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
6. Tighten the bleeder valves to the stipulated tightening torque and remove the bleeder hoses.
7. Also drain off some brake fluid at the bleeder valve of the clutch slave cylinder.
8. Remove bleeding device from brake fluid reservoir and screw cap on. The brake fluid level in the brake fluid reservoir must be between the MIN
and MAX markings once the vehicle has been filled and bled. Adjust the brake fluid level if necessary.
Brake fluid level
9. Place cover over brake fluid reservoir -B-.
Cover over brake fluid reservoir